SisTech purchases new SPEA 4060-S2

April 14th, 2016

In keeping up with customer driven requirements and to add an additional layer of Quality Assurance, SisTech has purchased a new 4060 S2 flying probe system. It the latest generation platform from SPEA. The new 4060 S2 system offers top and bottom probing that includes the fastest probe speeds with XYZ linear motors. Extreme probing accuracy is made possible by high-precision linear optical encoders on each XYZ axis. This technology provides the ability to contact the smallest Micro-Smd pads including 008004 components. The latest Ultra Soft-Touch technology ensures no probe damage to the smallest and most fragile probe targets. SPEA’s revolutionary flying tester concept moves the force and measurement instrumentation directly to the probe head. This minimizes the distance between the probe and instrument to provide unsurpassed performance and accuracy (0.1pf). Additional test/inspection capabilities include Optical Inspection, 3D laser test, IC open pin detection and many others. The advanced design and feature of the S2 platform offers the fastest test times, highest test coverage, and most accuracy and performance testing capabilities available in the Flying Probe market.

SisTech purchases 2nd Mirtec MV9-3D AOI machine!

May 19th, 2015

To allow for growth and increased capacity and as part of our continuous quality improvement, SisTech has purchased our 2nd Mirtec new MV9-3D AOI system. We have had such great results with our first MV9 that it only made sense to stick with a proven success. The real-time 3D visualization of the components on an assembly will ensure that sometimes hard to identify defects such as lifted leads or pillowed pads will not escape our inspection process.

SisTech purchases new Dage Ruby X-Ray with X-Plane!

April 29th, 2015

SisTech has purchased a new Nordson Dage Rudy X-Ray with X-Plane analysis. The ability to be able to inspect any plane throughout an assembly without having to cut or otherwise destroy the assembly will allow us to provide valuable feedback to our customers. We see this as another step in our goal of continuous improvement.

SisTech to install new 3rd SMT line

August 13th, 2014

SisTech Manufacturing is set to install our new 3rd SMT line the first week of November 2014. We have once again chosen Europlacer as our Pick-N-Place machine provider, going with their IINEO II dual gantry system. We have also chosen to use their SP700avi automatic screen printer. In addition, we have chosen to procure another ERSA HotFlow 3/20 Reflow Oven. We feel this addition will provide more capacity and allow us to grow while ensuring the Quality of the products we produce remain at the highest levels.

SisTech installs a 2nd ERSA EcoSelect II

August 13th, 2014

After using our existing EcoSelect II for the last 3 years and to accommodate our growth, SisTech has installed our 2nd ERSA EcoSelect II machine. This new machine has a few upgrades over our existing one including board warpage detection and heated nitrogen to the nozzle. This option allows for continued preheating during the soldering process which we expect to be especially helpful when soldering through hole components into boards with heavy ground or power planes.

SisTech receives “Preferred Assembly Supplier” from Linear Tech

June 3rd, 2014

We were notified today that Linear Technology has recognized SisTech as a preferred assembly supplier for their uModule (LGA) product line. We take great pride in the quality of all our assemblies and were very glad to be recognized for our efforts in delivering only quality products to our customers. Click here to view the letter.


SisTech installs new Mirtec MV9-3D AOI machine!

November 5th, 2013

Quality is imperative to SisTech.  As part of our continuous process improvement, SisTech has purchased Mirtec’s new MV9-3D AOI system. The real-time 3D visualization of the components on an assembly will ensure that sometimes hard to identify defects such as lifted leads or pillowed pads will not escape our inspection process.

 

SisTech installs new ERSA PowerFlow N2 Wave solder machine!

October 22th, 2013

If our effort t to provide faster turnaround and lower cost solutions for mixed technology and through hole technology products while still maintaining the quality SisTech is known for we have again chosen ERSA for our soldering needs. With the addition of the new ERSA wave we will be better able to service our high volume customers.

 

SisTech’s new facility is complete!

October 21th, 2013

SisTech has moved into our new building!  Our new address is 63068 Lower Meadow Drive. See the Facility page for pictures.

 

SisTech’s new Manufacturing Facility

June 28th, 2013

SisTech’s new 22K sqft facility is still on track for completion mid-September 2013.   This new facility will accommodate the growth SisTech has experienced since we opened for business in 2009 and allow for future growth.  The building will include state-of-the-art security and surveillance systems, ESD conductive flooring through-out, 1800 amps of power, as well as several new pieces of equipment brought online with the new facility.

SisTech’s new Manufacturing Facility SisTech’s new Manufacturing Facility

 

Certified IPC Specialists

June 28th, 2013 
SisTech’s employees have once again attained IPC Specialist Certifications. All SisTech employees have recently completed course studies for IPC-A-610, J-Std-001 and IPC-7711/7721. Once again SisTech is demonstrating that we encourage and promote continual learning and training opportunities to ensure that any and all products leaving our facility are the highest quality products our Customers can expect.

 

SisTech is ISO9001-2008 Certified!!

August 29th, 2012
SisTech is proud to annouce that we have attained ISO9001 certification. In addition, our Quality System has been verified to be AS9100C compliant as well.

Click to view: SisTech ISO9001 cert

 

SisTech to install new SMT line

November 2nd, 2011
Sistech Manufacturing is set to install our new SMT line the first week of December. We have once again chosen Europlacer as our Pick-N-Place machine provider, going with their IINEO II dual gantry system. We have also opted to use their SP700avi automatic screen printer. We feel this addition will provide more capacity and allow us to grow while ensuring the Quality of the products we produce remain at the highest levels.

 

Certified IPC Specialists

August 24th, 2011
SisTech’s employees have once again attained IPC Specialist Certifications. All SisTech employees have recently completed course studies for IPC-A-610, J-Std-001 and IPC-7711/7721. Once again SisTech is demonstrating that we encourage and promote continual learning and training opportunites to ensure that any and all products leaving our facility are the highest quality products our Customers can expect.

 

SisTech chooses ERSA’s EcoSelect II

April 5th, 2011
After carefully evaluating various selective soldering machines, SisTech has determined that ERSA’s EcoSelect II would be the ideal fit for our operation. We pride ourselves on rapid turnaround of various projects on a daily basis. With the dual solder pots (one 63/37 alloy and one SAC305 alloy) the changeover times between different projects will be short and effortless. Programming new projects will be simple using the ERSACad software. We look forward to receiving our new equipment on April 18th.

Ecoselect-22